Category: Safety

The Importance of Health and Safety Checks in Manufacturing and Engineering

In any workplace, health and safety should always be the top priority. Regardless of whether your facility is automated, health and safety should be paramount. The fact is that manufacturing and engineering industries have the most workplace accidents each year.

Posted in Guest Posts, Safety, Training Tagged with: , , ,

The Importance Of Machine Safety And Hiring A PLC Programming Specialist

Today’s article is a guest post from Automation Solutions, a Melbourne, Australia-based company. If you would like to post an article on this site, let me know! The Importance Of Machine Safety And Hiring A PLC Programming Specialist. Automated production

Posted in Controls Design, Guest Posts, Safety Tagged with: , , , ,

Safety PLCs

As safety systems become more and more complex (primarily because of the influence of European safety standards), the cost-effectiveness of safety PLCs has improved. I first noticed Safety PLCs being used only about five or six years ago, though according

Posted in Applications, Controllers, Controls Design, Safety, Vendors and Manufacturers Tagged with: , , ,

Operator Assisted Automation

Automated production lines and cells often have stations that require operator interfacing with the equipment. Typically this is due to the extreme costs that are associated with manual loading of parts into a machine. Parts may be too large or

Posted in Assembly, Automation Concepts, Machine Design, Poka-Yoke, Safety Tagged with: , , , , , , ,

Emergency Stops and Guard Circuits

Before the implementation of safety standards as defined in the machinery directive and OSHA the single channel circuit on the left was often used for most machines regardless of the hazard level. In the 1990s several events led to the

Posted in Automation Concepts, Controls Design, Safety Tagged with: , ,

CE Marking and the Machinery Directive

Last week I covered some of the US safety standards that apply to to machine building. As Tony mentioned in his comment on the subject, not all machines stay in the USA. This week I am going to discuss European

Posted in Controls Design, Machine Design, Safety Tagged with: ,

Safety Standards

When designing machinery for automated processes, one of the most important factors to consider is the safety of the personnel who will be using the equipment. Of secondary importance is the protection of the machinery itself. Due to the movement

Posted in Safety Tagged with:

Intrinsic Safety

When using control devices in hazardous areas such as explosive or flammable atmospheres special care must be taken to reduce or eliminate the possibility of heat or an electrical arc or spark causing damage to personnel or equipment. Because of

Posted in Hardware, Safety, Sensors Tagged with: , ,

Safety and Safety Analysis

The picture above is a manually operated station where an operator places two metal parts into a fixture. When the second item is placed a sensor activates a press mechanism and the two pieces are pressed together. When evaluating an

Posted in Safety Tagged with: ,

Safety Classifications

I have spent the last few days working on a fairly elaborate safety system that involves linking and unlinking safety zones. Usually I have used on machine as a “master” and the the other a “slave” or sub-zone, but this

Posted in Safety Tagged with: